In remote mode, only switch ON/OFF macro commands are executed.
Other macro commands than those switch macros are not executable.

Notes:

• Neither SYS commands or indirect address are executed even they are coded in the switch ON/OFF macro commands. 
• To use internal memory device in the switch macro commands, [Remote Monitor Setting] in the V-Server is required.
  
  

Procedure

1. On V-Server, select the monitored device which you are going to execute switch macro commands on.
2. Go to [Edit] > [Remote Monitor Setting].
   
   
   　
3. Click [Detail] buttton.  [Remote Operation in Macro] option appears.
   This options is valid when internal memory devices are used in the macro commands.
   Tick appropriate box(es) as necessary.

• Read Internal Memory
  Values stored in the internal memory devices in the monitored device are read to execute macro commands. 
  
  
• Write Internal Memory
  Execution results of the macro commands are stored in the internal memory devices in the monitored device.